Tenergy Smart Universal Charger for NiMH / NiCd Battery pack 7.2V - 12V with charging current Selection/Temperature Sensor from Tenergy

(click images to enlarge)
Tenergy Smart Universal Charger for NiMH / NiCd Battery pack 7.2V - 12V with charging current Selection/Temperature Sensor from Tenergy
$14.99

We are delighted to stock the excellent Tenergy Smart Universal Charger for NiMH / NiCd Battery pack 7.2V - 12V with charging current Selection/Temperature Sensor.

With so many on offer today, it is great to have a make you can recognise. The Tenergy Smart Universal Charger for NiMH / NiCd Battery pack 7.2V - 12V with charging current Selection/Temperature Sensor is certainly that and will be a perfect acquisition.

For this great price, the Tenergy Smart Universal Charger for NiMH / NiCd Battery pack 7.2V - 12V with charging current Selection/Temperature Sensor is widely recommended and is a regular choice with most people. Tenergy have provided some excellent touches and this results in good value for money.

Manufacturer Description

Accessories Included * 1 standard Tamiya Female connector and Fuse house with the smart battery charger. * 1 connector adaptor from standard Male Tamiya to Mini Female. * 1 set of clip adaptor with Male Tamiya connector on one end. * 2 additional fuses Smart Charger Specification * FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY * Input: AC100-240V * Output: 6-12V 0.9or1.8A Operation Instruction * Connect battery pack to output connector and plug AC power source. * Make sure battery polarity is connected correctly (Red wire is positive) * Charger will detect battery voltage automatically, Red LED will be on during charging * When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on * Battery will be charged at 0.9A or 1.8A constant current, * Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery. * The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun. * Don't charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than1100mAh. * Battery pack must be made by high drain current cell. * Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage. Caution * The charger is designed for indoor use only. Don't leave the charger unattended during charging. * The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep it away from flammable explosive goods. * Don't cover the charger when charging, ambient temperature shall not be more than 40oC * Don't touch the plug. * Don't leave the abtteries and chargers on wood surface or carpet. * Cut off the power supply before connect or disconnect the charger with batteries. * Don't try to disassemble the charger, High voltage inside, danger!

Product Features

Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours. Worldwide usage with 120-240V AC. Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life. Safety protection fuse for over current, short circuit & reverse polarity protection