TabStore DBPower® 6V-90V 15A DC Motor Pump Speed Controller Support Pulse-Width-Modulated (PWM) DC Voltage Duty Cycle Adjustable 0%-100% from DBPower

(click images to enlarge)
TabStore DBPower® 6V-90V 15A DC Motor Pump Speed Controller Support Pulse-Width-Modulated (PWM) DC Voltage Duty Cycle Adjustable 0%-100% from DBPower
$16.55

We are delighted to present the famous TabStore DBPower® 6V-90V 15A DC Motor Pump Speed Controller Support Pulse-Width-Modulated (PWM) DC Voltage Duty Cycle Adjustable 0%-100%.

With so many on offer these days, it is good to have a make you can recognise. The TabStore DBPower® 6V-90V 15A DC Motor Pump Speed Controller Support Pulse-Width-Modulated (PWM) DC Voltage Duty Cycle Adjustable 0%-100% is certainly that and will be a perfect purchase.

For this reduced price, the TabStore DBPower® 6V-90V 15A DC Motor Pump Speed Controller Support Pulse-Width-Modulated (PWM) DC Voltage Duty Cycle Adjustable 0%-100% comes highly recommended and is always a popular choice amongst lots of people. DBPower have added some excellent touches and this results in good value for money.

Manufacturer Description

Package included: 1* Motor Speed Control

Product Features

Input supply voltage: DC 6V-90V. The maximum output power: 1000W. The maximum continuous output current is 10A. The overload and short circuit protecting current is 15A PWM frequency: 16kHz. Duty cycle adjustable: 0-100%. Support adjusting the speed by the external 0-5V signal The operation environment temperature is -20C to 40C. The 20A fuse with reverse connection of power supply and control voltage over-voltage protection function. The use of 0-5V external voltage control line description NOTE: It can NOT be used to the BRUSHLESS motor. The controller is NOT reverse-polarity protected and will be damaged if connect the supply voltage with wrong polarity. Double check all connections before applying power and always turn off the power supply before making any wiring changes The speed controller supports the use of an external DC voltage control. Steps: First, remove potentiometer (you may take it down from one side of the circuit board or potentiometer side down under your need); Second, connecting 0-5V DC control signal to the middle pin marking 0-5V; Third, connecting the earth wire of 0-5V DC control signal to the connecting piece on the pin marking GND